Task Force Tips

The 2" NPT Gateable Valve and Control Interface Kit (YE-VKG-PH) is an electric gateable valve kit for EF1 and Tornado series remote control monitor...

Here we have a 2.0" Valve Repair Kit Y7005-KIT, which is a nozzle repair kit for RC Task Force Tips Nozzles.

Here we have the 5” Storz Suction Gasket Kit (A4221-CRK), part of the LDH Hardware Repair Kits. The kit is designed for Task Force Tips 5” Storz co...

Here we have a Jumbo BIV Rebuild Kit A1082-CRK. It includes all of the components needed to get you back up and running!

Here we have a BIV Valve Rebuild Kit A1520-CRK, which is an LDH Valve Rebuild Kit. It includes all of the components needed to get you back up and ...

Here we have a BIV Valve Seat Kit A1520-Kit, which is an LDH Hardware Repair Kit. It includes the Valve Seat, gaskets, and grease to get you back u...

The 7/8" X 1.5"F Straight Tip Nozzle FSS8 is a straight-bore nozzle. The nozzle is constructed from hard-coat anodized aluminum alloy and has a smo...

The 1/2" X 1-1/2"F Straight Tip FSS5 is a straight tip nozzle, and 1.5" NH (38mm) thread is standard. The nozzle is constructed from hard-coat anod...

The 1.5"F New York Stack Tip FSNYSTACK is a 15/16" (24mm) and 1/2" (12mm) dual-stacked tips. The base tip has a 15/16" (24mm) bore with 1.5" (38mm)...

The 1.5"F NFPA Stack Tip FS-3Stack sets are lightweight tips that have been hard-coat anodized, and have pressure/flow charts laser engraved on eac...

The Vortex Nozzle w/Detent Valve and Grip SVSG with manually controlled pattern control is a little powerhouse. Water dispersion is consistent thro...

This is a 1.0"F x 1.0"M Ball Valve with an unobstructed 3/4" (19mm) waterway. It is constructed of all lightweight materials and hard-coat anodized...

The 1.5"F Thunderfog w/Grip is a selectable gallonage nozzle with six flow settings of 30, 60, 95, 125, 150, and 200 gpm @ 75 psi (110-230-360-470-...

The LX-FOAMJET Ultimatic® Low Expansion Aspirating Attachment is for all Ultimatic® and Metro 0 Series nozzles. The FOAMJET is constructed of molde...

This is a 1.0"F x 1.0"M Ball Valve with an unobstructed 3/4" (19mm) waterway. It is constructed of all lightweight materials and hard-coat anodized...

This is a 1.0"F x 1.0"M Ball Valve with an unobstructed 3/4" (19mm) waterway. It is constructed of all lightweight materials and hard-coat anodized...

The HE Blitzfire OSC 2.5"NH Combo Package is an oscillating portable lightweight high-elevation attack monitor package comprising of an oscillating...

Rated up to 500 gpm, the Tornado Series RC Monitor 2.0"NPTF X 1.5"M is a remotely controlled truck-mounted monitor with electric remote control of ...

The Y4E-JS-GT Joystick Operator Station is designed for Task Force Tips Monsoon, Hurricane, Typhoon, Tsunami, EF1, and Tornado series remote contro...

The Y4E-JS-51 Joystick Style Control Station is designed for Task Force Tips Monsoon, Hurricane, Typhoon, Tsunami, EF1, and Tornado series remote c...

Here we have the 5” Storz Pressure Gasket Kit (A4220-KIT), part of the LDH Hardware Repair Kits. The kit is designed for Task Force Tips 5” Storz c...

The 2.0"NPT Valve and Interface Control Kit includes a heavy-duty 2" NPT 50mm) water valve and an interface box for simplified 12/24 volt wire conn...

The Eductor Series 125 GPM 1.5"F X 1.5"M foam eductor introduces foam concentrates into your water stream for firefighting foam operations. It is c...

The XFT-NJ Crossfire Monitor can be connected to either a portable base or a truck with appropriate adapters or a TFT Extend-A-Gun with an XL outle...