1.5" Dual-Force Nozzle w/Grip
The 1.5" DUAL FORCE Nozzle w/Grip is all conventional handline sizes in one. With a wide flow range of 95-300 gpm (360-1150 l/min), this series is an excellent choice for 2.5” (65mm) hose lines. The DUAL FORCE feature flush without shutdown, molded rubber bumper with "power fog" teeth, and TFT's patented stainless steel slide valve. All models accept low- or multi-expansion foam attachments. Please contact our sales team if you are interested in this FoamJet attachment series.
In the standard mode, the DUAL-FORCE Nozzle maintains a 100 psi / 7 bar operating nozzle pressure (75 psi / 5 bar on the low-pressure version). With a twist of the knob on the front of the nozzle, you can switch the DUAL-FORCE to the low-pressure mode, which immediately reduces the nozzle's operating pressure to around 55 psi /4 bar (approximately 45psi / 3 bar in the low-pressure version).
Automatic pressure control with a flow capacity of 95-300 gpm (360-1150 l/min). A pistol grip is mounted below the valve and the nozzle may be switched between standard 100 psi (7 bar) and low pressure.
Same as HD-VPGI shown above, but operates at a lower pressure of approximately 75 psi (5 bar) / 45 psi (3 bar). Flow capacity 95-250 gpm (360-950 l/min) @ 75 psi (5 bar).
They are constructed with an all-lightweight hard-coat anodized aluminum for maximum resistance to corrosion and wear. 1.5" NH (64mm) rocker lug full-time swivel coupling is standard.
Both units come with a laser-engraved serial number, reflective labeling, and a five-year warranty from Task Force Tips.